The technical solution of Foxtron Electric Bus combines domestic and international resources, each contributing its strengths： 1. It adopts Foxtron's self-developed VCU software, integrates and develops the EEA architecture for electric buses, and utilizes motors, batteries, and chassis suspension systems from international major manufacturers. In collaboration with domestic manufacturers, Foxtron designs and develops dedicated low-floor bus frames for chassis cooperation. 2. In the product design of electric buses, Foxtron identifies pain points in traditional buses and improves upon them. For example, traditional buses often have issues with rollover protection and numerous blind spots, as well as differential wheel rotation caused by wheelbase, leading to frequent traffic accidents due to visibility problems. To address these issues, Foxtron employs Computer-Aided Engineering (CAE) and NVH (Noise, Vibration, and Harshness) analysis to verify the design of various systems and components. This ensures the overall strength of the vehicle body and chassis, enhances passenger safety, and incorporates features such as panoramic image display and an electronic wide-angle rearview mirror with a blind spot detection system to solve driver blind spot issues. Additionally, to alert pedestrians and other road users to the risk of differential wheel rotation, Model T projects prominent light beams onto the ground during turns, marking the danger zone.

Delta’s EV charging solution utilizes the self-developed DeltaGrid® EVM, an electric vehicle charging management system for smart charging, power allocation, and charging equipment management. To avoid exceeding the site’s power limit during simultaneous charging, which could result in fines or power outages, the depot adopted a smart charging management system to effectively address power overuse and charging allocation issues. Under limited power conditions, the system efficiently allocates charging power for the electric buses and provides flexibility for future fleet expansion. To address the challenges of charging commercial fleets, the system has dedicated features that were developed for electric buses and commercial fleet charging needs, including Vehicle Identification, Site Current Limitation, Real-Time Alerts, etc, effectively enhances charging efficiency, optimizes operational benefits for electric fleets, and successfully demonstrates the transformation to the electrification of transportation.

Across urban and industrial environments, public facilities, critical assets, and infrastructure systems are often highly complex and geographically dispersed. Even minor abnormalities, if not identified and addressed in time, can lead to safety risks and operational disruptions. The Smart Mobile Inspection System is designed to address these challenges, enabling governments and enterprises to establish forward-looking digital inspection and maintenance management capabilities. The system integrates mobile devices, sensor data, and visual information, leveraging real-time AI analysis and anomaly detection to transform potential risks into predictable, traceable, and actionable management tasks. From anomaly alerts and intelligent task assignment to on-site reporting and final verification, the platform seamlessly connects every stage of the inspection workflow, delivering a fully digital, end-to-end inspection and maintenance management solution.

MIRDC’s continuously Rotating Wind Turbine UAV Inspection System can effectively inspect the working wind turbine without interference. It takes 5 minutes to complete the inspection of a single blade to effectively detect 4mm small cracks. The system will not lose power generation by turning off the wind turbine, further observes the actual movement status of running blade structure and pillars to grasp the defects beforehand.

Leveraging system development technology and combining it with environmental engineering consulting expertise, EGIT provides comprehensive and convenient climate-change adaptation support systems for various entities, including government agencies, financial institutions, universities, and private organizations. The system encompasses features such as GHG inventory, climate change risk alerts, and asset depreciation assessment. Our expertise assists organizations in addressing climate risks.

In the era of automation and digital transformation, the challenge for managers is no longer just hardware installation, but how to integrate fragmented subsystems into a connected network with a “brain.” The SOYAL WEB PLC (AR-401-PLC-1616R) was created precisely for this purpose as a cross-domain integration core. It breaks through the limitations of traditional PLCs, with a built-in web management interface and powerful dual communication channels (CH1 / CH2), enabling simultaneous coverage of both “identity recognition” and “physical facility monitoring.” With full support for the Modbus TCP protocol, on-site data can seamlessly connect to cloud platforms or SCADA central monitoring systems, making remote control and data analysis easily accessible.

CarbonClean Energy’s CO₂ electrolysis equipment E-Oak utilizes proprietary electrochemical conversion technology to directly transform carbon dioxide into high-value chemicals such as carbon monoxide, ethanol, and ethylene. This enables waste-gas reutilization while creating additional economic value. Unlike thermochemical carbon utilization processes that require high temperature, high pressure, and hydrogen input, E-Oak operates under ambient temperature and pressure. It only requires carbon dioxide and water to drive the conversion reaction, providing enhanced operational safety. In addition, E-Oak synchronizes operational data with the cloud, allowing users to remotely monitor equipment performance. Its automatic equipment diagnostic reporting function further facilitates smarter carbon management.

DeltaGrid® low-carbon emission energy solution focuses on the four major perspectives of energy creation, energy storage, energy control, and energy saving. It integrates solar energy, energy storage, EV chargers, energy management, as well as energy saving software and hardware products to provide a practical transformation solution that helps strengthen grid resilience, optimize energy dispatching, enhance renewable energy utilization, and achieve cost and energy saving, carbon emission reduction, and net zero sustainability goals. The solution is for four major areas, including power plants, industrial and commercial factories, electric vehicle charging stations, and community residences, so that renewable energy can be stably connected to the grid, stabilize the electricity consumption of industrial and commercial factories, and improve the operating efficiency of charging stations.

A-MTK is IP cams manufacturer in Taiwan, and complete virtual fence solution with IP cams equipped with edge AI computing, edge alarm notification, and back-end NVR pop-up notify. A-MTK virtual fence solution is simple to set up, cost-effective, and can be applied to factory perimeter, campus perimeter, hazardous area protection.... etc. A-MTK virtual fence allows users to set up "Hand-drawn Shape Warning Zone", "Cross-line Detection", and "Personnel Loitering Detection" for different scenarios. No matter day or night, color or black and white, it can have the best personnel detection effect. After detecting the personnel, it can provide sound and light alarms at the IP cam edge-end. In the same time, the solution cooperates with the administrator's office to make remote alarms with A-MTK NVR software.

ITS traffic data collection has solved the laborious and time-consuming task of manually calculating traffic flow in the past. It aims to achieve the goals of smoother road conditions and reduced accidents through intelligent traffic diagnosis. By utilizing intelligent transportation systems, the system automatically tracks vehicles, identifies vehicle types, predicts trajectories, and transforms the data into useful information. This assists in real-time interpretation and improvement of traffic engineering. This system is particularly crucial in Taiwan, where over 60% of traffic accidents occur at intersections. Through big data analysis, identifying issues and formulating solutions is possible, thereby lowering accident risks. This approach proves more effective than simple advocacy and alerts.

Smart Multifunctional Periodontal Pathology Quick Screening System (SMPPQSS) is the first product able to automatically identify the position of teeth and then to calculate the distribution area of dental plaque simultaneously. The system also provides a new painless gingivitis examination method that could relief examining discomfort. Neither the need of the plaque disclosing tablet nor a probe to penetrate into the patient’s periodontal pocket to determine the degree of periodontitis. Once all tooth-related data is automatically filled into the periodontal digits, the medical record sheet is uploaded to the system directly. It shortens the process to less than 10 minutes, greatly reducing the discomfort of patients during the examination as well as shortening the time doctors need to diagnose and record. SMPPQSS is easy to operate and portable. Dentists or dental assistants can check periodontal health quickly with no restriction of facilities, patients can receive a more convenient medical care even in remote rural areas or at home, or with limited mobility.

This solution provides customized AI model development and system integration services for governments and enterprises with existing systems and data. SynaiQ delivers end-to-end support, including consulting, LLM design, deployment, and long-term maintenance. The modular and scalable architecture reduces barriers to AI adoption while enabling organizations to build sustainable, flexible, and future-ready intelligent systems.