MIRDC’s continuously Rotating Wind Turbine UAV Inspection System can effectively inspect the working wind turbine without interference. It takes 5 minutes to complete the inspection of a single blade to effectively detect 4mm small cracks. The system will not lose power generation by turning off the wind turbine, further observes the actual movement status of running blade structure and pillars to grasp the defects beforehand.

1. Directly driving fans with a motor increases transmission efficiency and highlights the superiority of direct drive systems over traditional transmission systems, especially when combined with a variable-speed control mechanism and at lower rotating speeds. 2. The absence of mechanical components in a direct drive system eliminates the need for regular maintenance of the reducer, gearbox, and transmission shaft, as well as reduces the risk of oil leaks. This results in lower maintenance costs, longer product life, and reduced operating costs for customers. 3. Installation of TECO's proprietary inverter for cooling tower can reduce operating noise, buffer activation, and lower mechanical impact. 4. A 30 kW motor in constant-frequency operation can reduce total operating costs by up to 18% over a five-year period.

In order to save the use of natural resources, implement resource recycling and reuse, reduce processing costs and reduce environmental load. We use the recycling processing technology to transfer the remaining cutting materials of the ALC body, as well as industrial by-products and domestic waste resources (waste glass) back to the ALC raw material for use. Actual testing of the product shows that the reuse technology is feasible, the quality is stable, and the efficiency of waste reduction and carbon reduction is high. Now It has obtained the environmental protection label from the Ministry of Environment and the green building materials label from the Ministry of Interior.

Intelligent Positioning System can remotely track the paths, remotely set the access authority, and provide the access alarm and SOS alarm based on configured location Bluetooth sensors. There are three applications: [Guardian Wristband] Authority can know whether home quarantine people are at home. Through the beacon wristband connects with receiver. If home quarantine people are leaving home, the system will send notification to the authority. [Indoor Navigation] Locate users’ position via Bluetooth and precede indoor navigation to let users know their position and find the way in building. This service is applicable to large areas such as airports, stations, department stores, etc. [Intelligence on People Seeking] With smart positioning wristband, users can instantly know current location of their children or parents via App. It could avoid the common problem of missing family.

Feature •Automatic Gain Control (AGC). •Backlight Compensation. •Automatic White Balance. •Wide Dynamic Range (WDR) function with 120dB at 30 FPS. •Night noise suppression function. •Nighttime shooting with automatic aperture adjustment. •Stable image quality during low-light shooting at night under stable external light conditions, ensuring no flicker or color rolling, and clear nighttime images. Specifications •Uses a CMOS 1/3” Image Sensor. •MAX Resolutions：2MP (1920×1080 pixels)，D1 (640x480 pixels) •Maximum Frame Rate：30 FPS @1920×1080，30 FPS @640x480 •Focal Length：2MP lens ： 2.8-12mm±5%，D1 lens ： Fixed •Minimum Illumination：Color： Below 0.06 Lux，Black：Below 0.02 Lux.

StarTrust System boasts a proficient team of consulting experts, each holding certifications in ISO 14064-1, ISO14067, ISO 50001, ISO 14001, SBTi, GRI Standard, and other relevant standards. We offer comprehensive guidance services encompassing greenhouse gas inventories (ISO 14064-1, GHG Protocol), carbon footprint assessments (ISO 14067), and advisory support for international initiatives such as CDP and SBTi. Additionally, we provide consultancy expertise in ESG report preparation, energy management, carbon neutral, and carbon reduction strategies. To ensure data integrity, our consulting team at StarTrust System adopts systematic management practices. We meticulously organize activity documents, regulations, calculation parameters, and other pertinent data, ensuring timely updates to adhere to the latest regulations and calculation methodologies. Our approach mitigates complexities and minimizes the risk of errors in enterprise reporting operations. Our services include: 1. Comprehensive guidance on ISO 14064-1, GHG Protocol, and related assessments. 2. Expert support for ISO 14067 product carbon footprint assessments. 3. Advisory services for implementing ISO 50001 energy management systems. 4. Analysis of carbon emission data reports. 5. Assistance with international initiatives such as CDP and SBTi. 6. Professional preparation of ESG sustainability reports.

Building a Intelligent Transportation Network The traffic system is the artery of an urban development. To improve traffic quality and build a intelligent transportation network, Taiwan SECOM is working with local governments to promote smart street lights. The brightness of these lights can be adjusted according to the surrounding environment, which not only conserves energy but also reduce traffic accidents caused by insufficient lighting. A traffic flow detection system can immediately analyze the traffic flow of each main path and the substitute routes can be immediately displayed on the display to effectively divert traffic flow. The geomagnetic sensor and smart parking meter will help you live occupancy reoporting and fee calculation. Smart Street Light ．Smart Lighting: adjusts brightness according to various scenarios. ．Traffic detection: optimizes traffic routing and analyzes traffic flows. ．Environmental Sensing: detects the temperature, humidity, and PM 2.5 levels. Smart Parking Meter ．Live ocupancy reoporting and fee calculation. ．Bill pringting and support third party payment. ．Significantly reduce the labor cost of road side billing by more than 50%.

DeltaGrid® low-carbon emission energy solution focuses on the four major perspectives of energy creation, energy storage, energy control, and energy saving. It integrates solar energy, energy storage, EV chargers, energy management, as well as energy saving software and hardware products to provide a practical transformation solution that helps strengthen grid resilience, optimize energy dispatching, enhance renewable energy utilization, and achieve cost and energy saving, carbon emission reduction, and net zero sustainability goals. The solution is for four major areas, including power plants, industrial and commercial factories, electric vehicle charging stations, and community residences, so that renewable energy can be stably connected to the grid, stabilize the electricity consumption of industrial and commercial factories, and improve the operating efficiency of charging stations.

Yunlin County Government is dedicated to establishing a human-centric smart agriculture, providing services for digital and green transformation to overcome industry challenges and climate change. People collaborate with machines, automation equipment, and computers to enhance industrial productivity by using information technology. Simultaneously, it promotes Intelligence Augmentation (IA), fostering the growth of industry personnel capabilities. To accelerate agricultural transformation, solutions are developed with experts in various fields of agriculture and livestock. Through sharing successful case studies, the aim is to guide industry stakeholders to embrace new knowledge and technologies. Additionally, counseling teams assist farmer groups in transitioning towards a smart agriculture concept that combines 'smart technology' and the 'net-zero emission' approach. The development focuses on creating a future agriculture model primarily based on automation and AI, striving for efficiency, quality, and Intelligent Automation (IA).The project won the 2024 Smart City Innovation Application Awards.

The Sustainability Performance Management Platform assists enterprises in extending their management perspective from direct emissions to the entire value chain, ensuring the precise implementation of supplier sustainability performance management. The system features a comprehensive digital survey and data management platform, covering everything from questionnaire design, distribution, and response collection to multi-level approval and statistical analysis, enabling companies to integrate supply chain data with maximum efficiency. With flexible template design and year-over-year comparison tools, enterprises can track trends in key issues in real-time. The system supports diverse data entry methods and automated chart generation, while also offering seamless integration with sustainability reporting systems to enable automatic data updates. By leveraging this digital system, companies can establish a highly traceable data management process and significantly strengthen supply chain resilience. Core System Features: 1. Supplier and Stakeholder Performance Assessment: Digitally collect and audit various ESG indicators. 2. Automated Statistical Analysis and Comparison: Generate real-time visual reports to track annual performance trends. 3. Data Integration and Report Linking: Streamline data aggregation to accelerate the production of sustainability reports.

With the emergence of technologies such as 5G, the Internet of Things, Artificial Intelligence and Cloud Computing in recent years, the server industry has experienced explosive growth. In line with the two major trends of "software definition" and "open standards," private industry and governments are collaborating to promote numerous high-tech research projects and the development of critical technologies. As the cloud industry chain continues to evolve, the annual power consumption of data centers, which are made up of numerous individual servers, increases greatly. Consequently, the effective thermal management of servers and data centers has become an increasingly crucial issue.

Driven by digital transformation and ESG initiatives, Eup’s Smart Shuttle Transportation Solution redefines commuting services for shuttle fleets. Through a dual-platform system combining Web and App, shuttle operations are fully automated. Precise positioning technology enhances management efficiency and helps establish a high-quality image of intelligent transportation. Dual Smart Platforms: Integrated management and user apps with transparent, synchronized information. Real-Time Location & ETA: Track vehicle location and arrival time via mobile devices, reducing passenger waiting anxiety. Service Brand Upgrade: A technology-driven shuttle network that significantly improves overall ride satisfaction. Efficient Digital Dispatching: Online route planning and real-time monitoring to elevate fleet and transport management quality. Intelligent Transportation Solutions for Industrial & Cold Chain Logistics