Far EasTone Telecommunications (FET) is committed to corporate sustainability and net-zero transformation. By integrating telecommunications with digital technologies, FET helps industries and society reduce carbon emissions. In the public building sector, FET is developing integrated solutions for “Net-Zero and Disaster-Resilient Energy Storage.” Combining net-zero strategies with Energy Management Systems (EMS), FET deploys renewable energy, energy storage, and smart energy-saving mechanisms. This approach balances carbon reduction with power resilience, supporting the public sector in enhancing sustainability and disaster preparedness. A key achievement is the National Taiwan Ocean University (NTOU) Gymnasium project, where FET implemented an advanced energy management platform integrating power monitoring, smart HVAC control, and renewable energy with storage systems. These efforts improved energy efficiency, provided a model for transitioning public buildings to net-zero, and earned the client Level 1+ Green Building certification. Looking ahead, FET will continue investing in net-zero buildings, energy storage, and resilient energy systems. Through collaboration with government, academia, and industry partners, FET aims to accelerate Taiwan’s progress toward sustainable development goals, advancing both net-zero emissions and disaster prevention.

The technical solution of Foxtron Electric Bus combines domestic and international resources, each contributing its strengths： 1. It adopts Foxtron's self-developed VCU software, integrates and develops the EEA architecture for electric buses, and utilizes motors, batteries, and chassis suspension systems from international major manufacturers. In collaboration with domestic manufacturers, Foxtron designs and develops dedicated low-floor bus frames for chassis cooperation. 2. In the product design of electric buses, Foxtron identifies pain points in traditional buses and improves upon them. For example, traditional buses often have issues with rollover protection and numerous blind spots, as well as differential wheel rotation caused by wheelbase, leading to frequent traffic accidents due to visibility problems. To address these issues, Foxtron employs Computer-Aided Engineering (CAE) and NVH (Noise, Vibration, and Harshness) analysis to verify the design of various systems and components. This ensures the overall strength of the vehicle body and chassis, enhances passenger safety, and incorporates features such as panoramic image display and an electronic wide-angle rearview mirror with a blind spot detection system to solve driver blind spot issues. Additionally, to alert pedestrians and other road users to the risk of differential wheel rotation, Model T projects prominent light beams onto the ground during turns, marking the danger zone.

DeltaGrid® low-carbon emission energy solution focuses on the four major perspectives of energy creation, energy storage, energy control, and energy saving. It integrates solar energy, energy storage, EV chargers, energy management, as well as energy saving software and hardware products to provide a practical transformation solution that helps strengthen grid resilience, optimize energy dispatching, enhance renewable energy utilization, and achieve cost and energy saving, carbon emission reduction, and net zero sustainability goals. The solution is for four major areas, including power plants, industrial and commercial factories, electric vehicle charging stations, and community residences, so that renewable energy can be stably connected to the grid, stabilize the electricity consumption of industrial and commercial factories, and improve the operating efficiency of charging stations.

Delta’s EV charging solution utilizes the self-developed DeltaGrid® EVM, an electric vehicle charging management system for smart charging, power allocation, and charging equipment management. To avoid exceeding the site’s power limit during simultaneous charging, which could result in fines or power outages, the depot adopted a smart charging management system to effectively address power overuse and charging allocation issues. Under limited power conditions, the system efficiently allocates charging power for the electric buses and provides flexibility for future fleet expansion. To address the challenges of charging commercial fleets, the system has dedicated features that were developed for electric buses and commercial fleet charging needs, including Vehicle Identification, Site Current Limitation, Real-Time Alerts, etc, effectively enhances charging efficiency, optimizes operational benefits for electric fleets, and successfully demonstrates the transformation to the electrification of transportation.

Building a Intelligent Transportation Network The traffic system is the artery of an urban development. To improve traffic quality and build a intelligent transportation network, Taiwan SECOM is working with local governments to promote smart street lights. The brightness of these lights can be adjusted according to the surrounding environment, which not only conserves energy but also reduce traffic accidents caused by insufficient lighting. A traffic flow detection system can immediately analyze the traffic flow of each main path and the substitute routes can be immediately displayed on the display to effectively divert traffic flow. The geomagnetic sensor and smart parking meter will help you live occupancy reoporting and fee calculation. Smart Street Light ．Smart Lighting: adjusts brightness according to various scenarios. ．Traffic detection: optimizes traffic routing and analyzes traffic flows. ．Environmental Sensing: detects the temperature, humidity, and PM 2.5 levels. Smart Parking Meter ．Live ocupancy reoporting and fee calculation. ．Bill pringting and support third party payment. ．Significantly reduce the labor cost of road side billing by more than 50%.

A-MTK Expands Presence in TRA Stations 2025 Project Installation Scope: Zuoying, Neiwei, Museum of Fine Arts, Gushan, Sankuaicuo, Kaohsiung, Minzu, Science and Technology Museum, Zhengyi, and Fengshan Stations To enhance station security and management efficiency, ten TRA stations in Kaohsiung will be newly equipped with A-MTK IP cameras, expanding surveillance coverage and integrating with the access control system. The project achieves the following outcomes: Video Surveillance Deployment: Multi-point installation of A-MTK IP cameras inside and outside stations, providing real-time monitoring, event recording, and playback. Access Control + Video Integration: When an abnormal access event occurs (such as unauthorized card use or forced door opening), the system automatically pops up the corresponding camera feed and simultaneously sends an alarm notification to the management center. Centralized Monitoring Platform: The Kaohsiung control center can instantly oversee access control status and video feeds, achieving cross-station integrated management. Cybersecurity and Reliability: A-MTK is ISO 27001 certified; IP cameras are CE/FCC/BSMI certified. With system disconnection recovery, continuous operation is ensured without interruption.

Specially for micro parts with a diameter less than 2mm, the CMHT is equipped with integrate automatic feeding system, automatic monitoring and carburizing quenching furnace for real-time adjustment, innovative oil tank, collecting device and intelligent digital services. It provides the heat treatment industry with customized, intelligent production solution. Its advantages are as follows ‧ CMHT has 100% collecting rate (50~60% for traditional equipment), 99% yield rate (50~65% for traditional one). ‧ CMHT reduces heat treatment schedule from 30 days to 2 days only. Based on demand, CMHT can rapidly replace process modules to substitute whole traditional heat treatment equipment and price of CMHT is only half of traditional one. ‧ Introducing intelligent digital service function, CMHT transforms experiences of traditional equipment into data decision, reduces reliance on human experiences, sets up industrial IoT solution and provides heat treatment industry with smart manufacturing via cloud services. ‧ Won the international honor of R&D 100 Awards and Edison Awards.

In response to the rapid transition into a super-aged society, Nantou County faces significant challenges due to its vast geographic area and the uneven and insufficient distribution of medical resources. Many elderly residents and persons with disabilities experience difficulties in accessing prescription medications. In 2025, Nantou County launched the nation’s first “Home Medication Delivery Service System.” This innovative service allows elderly residents or their family members to apply and make appointments online. Licensed pharmacists then deliver medications directly to the patient’s home free of charge. By integrating technology with compassionate care, the program promotes medication equity and enhances medication safety for vulnerable populations. It also reduces the caregiving burden caused by long travel distances and limited transportation options. Through this initiative, Nantou County is committed to building an age-friendly city that ensures accessible, safe, and dignified healthcare services for all residents.

In order to save the use of natural resources, implement resource recycling and reuse, reduce processing costs and reduce environmental load. We use the recycling processing technology to transfer the remaining cutting materials of the ALC body, as well as industrial by-products and domestic waste resources (waste glass) back to the ALC raw material for use. Actual testing of the product shows that the reuse technology is feasible, the quality is stable, and the efficiency of waste reduction and carbon reduction is high. Now It has obtained the environmental protection label from the Ministry of Environment and the green building materials label from the Ministry of Interior.

Live crowd movement information is crucial in busy public spaces. Manual checks and basic sensors often lack accuracy and fail to keep up with real-time changes. The People Counting System uses AI video analytics and multi-sensor fusion. It delivers accurate, real-time crowd data. The system automatically counts people, tracks direction, monitors density, and provides instant alerts and reports. Deep learning ensures accuracy in low-light or crowded conditions. Multi-target tracking prevents double-counting. Edge computing and cloud-based management enable on-site analysis and long-term monitoring. Integrating cameras, infrared, Wi-Fi, and Bluetooth data improves detection and increases coverage. The system generates real-time heat maps, flow analyses, and historical records. These support layout optimization, entry regulation, evacuation planning, and efficiency. The system serves malls, transit hubs, campuses, parks, and public buildings. It is vital for smart cities. It replaces manual counting with intelligent management for better safety, responsiveness, and adaptability.

Prof. Chia-Hsin Chen’s Team – An Innovative AI-Powered Tongue Vibration Training System This project develops an AI-driven tongue vibration training system for dysphagia and obstructive sleep apnea. It combines a safe, adjustable tongue device, AI motion tracking with real-time biofeedback, EEG-based cognitive monitoring, and AR-based gamified training to deliver personalized, engaging, and data-driven rehabilitation.

With our fiber sDAS, Wave-In effectively reduce mobile signal dead spots caused by insufficient base station coverage, buildings or electromagnetic signal interference. Due to the pandemic, Taiwanese Engineers weren’t able to assist with on-site installation and coverage testing, to solve this problem and improve efficiency, Wave-In utilized Mixed Reality for collaboration and remote assistance.