MIRDC’s continuously Rotating Wind Turbine UAV Inspection System can effectively inspect the working wind turbine without interference. It takes 5 minutes to complete the inspection of a single blade to effectively detect 4mm small cracks. The system will not lose power generation by turning off the wind turbine, further observes the actual movement status of running blade structure and pillars to grasp the defects beforehand.

1. Integrating data of water quality and water consumption, the online system will automatically conduct continuous data monitoring, and can be applied for both clean water and sewage water measurement. 2. Real-time monitoring: Seize real-time water information to maintain the stability of water quality and instantly react when abnormal condition is detected, dramatically increasing management efficiency. 3. Smart Dosing Scenario: Integrating automatic dosing equipments with upper and lower alarm settings to ensure dynamic stability of water quality and decrease labor cost. 4. Data Analysis: Apply schedule planning to build up the trend of historical changes and to develop the situation management model. 5. Compliance with the regulations: Complete the full-time management mode, in compliance with the regulations of the competent authority and environmental protection standards. 6. The water quality sensor (specific model) is automatically cleaned without additional consumables and can be cleaned frequently.

Delta’s EV charging solution utilizes the self-developed DeltaGrid® EVM, an electric vehicle charging management system for smart charging, power allocation, and charging equipment management. To avoid exceeding the site’s power limit during simultaneous charging, which could result in fines or power outages, the depot adopted a smart charging management system to effectively address power overuse and charging allocation issues. Under limited power conditions, the system efficiently allocates charging power for the electric buses and provides flexibility for future fleet expansion. To address the challenges of charging commercial fleets, the system has dedicated features that were developed for electric buses and commercial fleet charging needs, including Vehicle Identification, Site Current Limitation, Real-Time Alerts, etc, effectively enhances charging efficiency, optimizes operational benefits for electric fleets, and successfully demonstrates the transformation to the electrification of transportation.

Powered by AI, this platform provides businesses with compliance management, risk intelligence analysis, and data-driven sustainable supply chain resilience, enabling them to effectively manage their supply chains.

This service provides integrated solutions for drilling-related equipment, consumables, and materials, assisting clients in selecting and configuring resources according to project requirements to ensure material quality and engineering compatibility. Through a streamlined supply approach and project experience, procurement and operational risks are reduced, enhancing overall project execution efficiency. The service can be flexibly adjusted based on project scale and technical needs, supporting practical requirements from pre-drilling preparations through the execution phase.

Leveraging its strong telecommunications and ICT integration expertise, Far EasTone delivers comprehensive smart building solutions for modern, data-driven environments. With a reliable fiber backbone, 4G/5G and Wi-Fi networks, and IoT technologies, Far EasTone seamlessly connects on-site sensors, surveillance, access control, and environmental systems to create a secure and resilient data infrastructure. By adopting open communication protocols, Far EasTone enables cross-system integration, consolidating previously fragmented power, fire safety, HVAC, and low-voltage systems into a unified building management platform. This ensures intelligent centralized monitoring and coordinated operations across all building systems. The platform offers real-time monitoring, data analytics, operations and maintenance management, and AI-powered Digital Twin visualization. It empowers building owners with full lifecycle visibility, reduces energy consumption, enhances operational efficiency, and delivers safer, smarter, and more sustainable buildings.

Fire notification + Emergency notification video device Taiwan Secom Technology Group launched a combination of 119 fire notification device and emergency notification image system, integrated anti-robbery, disaster prevention,and video, through real – timeimage monitoring and recording the scene, to grasp abnormal conditions; 24-hour control service center Line, monitor the signal for abnormality at any time ; if there is any abnormal information, it is immediately transmitted to the 119 and 110 service centers to reduce disaster expansion; the communication host has automatic detection function, and the control service center immediately dispatches personnel to overhaul when there is a failure; a test button , At any time to check whether the system is normal, and automatically fax back to the test status.

Leveraging world-class 5G and advanced technologies, FET has built a “5G Telemedicine Platform” to deliver mobile, zero-day telemedicine services. This year, 5G telemedicine has expanded to 15 counties and 59 districts. During the COVID-19 pandemic, we also supported hospitals in providing remote clinical services and maintaining routine medical care. Features Real-time telemedicine services to strengthen medical resources in remote areas Support for medical IoT devices High-level system integration with hospital workflows Newly introduced patient functions to meet epidemic-related demands AI-powered analysis to assist physicians in diagnosis Full-time video recording to ensure doctor-patient trust and information security Support for virtual NHI cards Awards & Certifications • 2026 Taiwan Excellence Award – The highest honor for product innovation and superior quality • 2025 National Industrial Innovation Award – First telecom company to win in 18 years • 2025 Yang Award – Sole telecom winner for smart healthcare innovation • British Chamber of Commerce in Taipei – Better Business Award 2025 • Certified with U.S. HIPAA for global data security compliance • Holds ISO 27001, ISO 27017, ISO 27018, and ISO 27701 certifications

Prof. Ming-Chung Chou’s Team – Intelligent X-ray Imaging System Traditional X-ray imaging depends on experienced radiographers to balance image quality and radiation dose. Automatic exposure control may misjudge patients with poor positioning or metallic implants, increasing radiation by about 20%. This study develops an AI-based X-ray imaging system with non-contact body thickness measurement. By integrating patient height and weight, the system automatically determines optimal exposure parameters, ensuring stable image quality while reducing unnecessary radiation and cancer risk.

Through matchmaking of public and private forests, enterprises can acquire forest-related data through hosting mechanisms. This includes metrics such as survival rate, tree height, carbon sequestration, and corresponding SDGs (Sustainable Development Goals) indicators. Leveraging deep learning and image processing technology, CoCoTree transforms trees and forest landscapes into data, providing customers with highly accurate forest information. This includes metrics such as carbon emissions, tree growth status, and changes in the ecosystem.

The “MiAIOT x 5G Railway Safety Management System was developed based on MiTAC’s in house AIoT platform-“MiAIoT”, and will assist the digital transformation of Taiwan's rail industry in the future, including cloud-based train operating data exchange, real-time train warning system, AI equipment abnormality prediction, and feeding all these crucial information to a situation “war room”.

The Track Safety Management System is primarily aimed at addressing safety concerns along the track. It provides real-time monitoring, statistics, and detection-triggered alerts for trackside environments including stations, level crossings, along the track, and slope areas. The goal of this management system is to establish early warning alerts and prevent accidents from causing damage. Through the intelligent AIOT recognition monitoring system, it detects and analyzes station pedestrian traffic, tracks pedestrians at level crossings, identifies passing vehicles and traffic flow, detects foreign objects at level crossings and activates alarms, monitors personnel lingering and debris along the track, conducts rockfall monitoring on slopes with a rain gauge, monitors the environmental conditions in equipment boxes, and oversees the operation status of level crossing equipment. The monitoring data and image information are transmitted to the management system platform for integrated management via fiber-optic networks, NBIOT, or mobile communication. Additionally, it provides central management personnel with real-time interpretation and remote control in case of anomalies.