Delta’s EV charging solution utilizes the self-developed DeltaGrid® EVM, an electric vehicle charging management system for smart charging, power allocation, and charging equipment management. To avoid exceeding the site’s power limit during simultaneous charging, which could result in fines or power outages, the depot adopted a smart charging management system to effectively address power overuse and charging allocation issues. Under limited power conditions, the system efficiently allocates charging power for the electric buses and provides flexibility for future fleet expansion. To address the challenges of charging commercial fleets, the system has dedicated features that were developed for electric buses and commercial fleet charging needs, including Vehicle Identification, Site Current Limitation, Real-Time Alerts, etc, effectively enhances charging efficiency, optimizes operational benefits for electric fleets, and successfully demonstrates the transformation to the electrification of transportation.

The technical solution of Foxtron Electric Bus combines domestic and international resources, each contributing its strengths： 1. It adopts Foxtron's self-developed VCU software, integrates and develops the EEA architecture for electric buses, and utilizes motors, batteries, and chassis suspension systems from international major manufacturers. In collaboration with domestic manufacturers, Foxtron designs and develops dedicated low-floor bus frames for chassis cooperation. 2. In the product design of electric buses, Foxtron identifies pain points in traditional buses and improves upon them. For example, traditional buses often have issues with rollover protection and numerous blind spots, as well as differential wheel rotation caused by wheelbase, leading to frequent traffic accidents due to visibility problems. To address these issues, Foxtron employs Computer-Aided Engineering (CAE) and NVH (Noise, Vibration, and Harshness) analysis to verify the design of various systems and components. This ensures the overall strength of the vehicle body and chassis, enhances passenger safety, and incorporates features such as panoramic image display and an electronic wide-angle rearview mirror with a blind spot detection system to solve driver blind spot issues. Additionally, to alert pedestrians and other road users to the risk of differential wheel rotation, Model T projects prominent light beams onto the ground during turns, marking the danger zone.

A-MTK Expands Presence in TRA Stations 2025 Project Installation Scope: Zuoying, Neiwei, Museum of Fine Arts, Gushan, Sankuaicuo, Kaohsiung, Minzu, Science and Technology Museum, Zhengyi, and Fengshan Stations To enhance station security and management efficiency, ten TRA stations in Kaohsiung will be newly equipped with A-MTK IP cameras, expanding surveillance coverage and integrating with the access control system. The project achieves the following outcomes: Video Surveillance Deployment: Multi-point installation of A-MTK IP cameras inside and outside stations, providing real-time monitoring, event recording, and playback. Access Control + Video Integration: When an abnormal access event occurs (such as unauthorized card use or forced door opening), the system automatically pops up the corresponding camera feed and simultaneously sends an alarm notification to the management center. Centralized Monitoring Platform: The Kaohsiung control center can instantly oversee access control status and video feeds, achieving cross-station integrated management. Cybersecurity and Reliability: A-MTK is ISO 27001 certified; IP cameras are CE/FCC/BSMI certified. With system disconnection recovery, continuous operation is ensured without interruption.

Prof. Ming-Yen Lin’s Team – A Prediction Model for Type 2 Diabetes Complications Our research group develops a decision-support prediction model for type 2 diabetes complications using data from over 163,000 Taiwanese patients. Integrating age, HbA1c, and other dynamic factors, the model estimates long-term risks of major complications and mortality, visualizes future trends, and supports personalized care planning to improve disease management and outcomes.

Building a Intelligent Transportation Network The traffic system is the artery of an urban development. To improve traffic quality and build a intelligent transportation network, Taiwan SECOM is working with local governments to promote smart street lights. The brightness of these lights can be adjusted according to the surrounding environment, which not only conserves energy but also reduce traffic accidents caused by insufficient lighting. A traffic flow detection system can immediately analyze the traffic flow of each main path and the substitute routes can be immediately displayed on the display to effectively divert traffic flow. The geomagnetic sensor and smart parking meter will help you live occupancy reoporting and fee calculation. Smart Street Light ．Smart Lighting: adjusts brightness according to various scenarios. ．Traffic detection: optimizes traffic routing and analyzes traffic flows. ．Environmental Sensing: detects the temperature, humidity, and PM 2.5 levels. Smart Parking Meter ．Live ocupancy reoporting and fee calculation. ．Bill pringting and support third party payment. ．Significantly reduce the labor cost of road side billing by more than 50%.

TECO develop Air conditioners base on the core vision of ” Energy Saving , Emissions Reduction, Intelligent Operation, Automation” in order to provide total AIoT solutions. Our residential air condition series apply “Smart maintenance system” which could inspect operation status/ collect data /diagnose issues and provide appropriated troubleshooting suggestions proactively and precisely. The system utilizes expert system not only solve issues but also initiate a tailor-made service plan in a shorter time with less manpower.

Leveraging world-class 5G and advanced technologies, FET has built a “5G Telemedicine Platform” to deliver mobile, zero-day telemedicine services. This year, 5G telemedicine has expanded to 15 counties and 59 districts. During the COVID-19 pandemic, we also supported hospitals in providing remote clinical services and maintaining routine medical care. Features Real-time telemedicine services to strengthen medical resources in remote areas Support for medical IoT devices High-level system integration with hospital workflows Newly introduced patient functions to meet epidemic-related demands AI-powered analysis to assist physicians in diagnosis Full-time video recording to ensure doctor-patient trust and information security Support for virtual NHI cards Awards & Certifications • 2026 Taiwan Excellence Award – The highest honor for product innovation and superior quality • 2025 National Industrial Innovation Award – First telecom company to win in 18 years • 2025 Yang Award – Sole telecom winner for smart healthcare innovation • British Chamber of Commerce in Taipei – Better Business Award 2025 • Certified with U.S. HIPAA for global data security compliance • Holds ISO 27001, ISO 27017, ISO 27018, and ISO 27701 certifications

PALF is committed to developing eco-friendly textile products by using recyclable, zero-carbon emission agricultural waste "Pineapple Leaf" to establish the first localized sustainable yarn and fabric pilot production line in Taiwan. We promote the recycling of waste materials to create a more environmentally friendly, sustainable textile and fashion industry.

Baseball enjoys widespread popularity in Taiwan, and our cutting-edge 5G live streaming technology elevates the sport to a new level. Through real-time 360-degree tracking, we present a three-dimensional strike zone, delivering an unprecedented viewing experience. This innovation not only enhances the enjoyment for spectators but also serves as a valuable tool for training. Coaches and sports science teams can leverage precise multi-angle recordings to analyze and optimize player movements, effectively contributing to enhanced athletic performance.

Remote expert video collaboration solution uses AR smart glasses to transmit onsite situation to the remote technical experts with high-definition real-time video, and guide the on-site engineer to troubleshoot and repair the fault from the first-person view perspective and free their hands. This is not only improves maintenance efficiency, but also ensures safety. It also achieve the sharing and inheritance of expert resources and high cost of traveling on site. When encountering difficult situations, multiple technical experts can also be invited for consultation. Experts can provide real-time multi-party HD video guidance with the on-site engineer, whether on PC or smartphone, to jointly solve technical issues and reduce downtime losses.

Prof. Ming-Chung Chou’s Team – Intelligent X-ray Imaging System Traditional X-ray imaging depends on experienced radiographers to balance image quality and radiation dose. Automatic exposure control may misjudge patients with poor positioning or metallic implants, increasing radiation by about 20%. This study develops an AI-based X-ray imaging system with non-contact body thickness measurement. By integrating patient height and weight, the system automatically determines optimal exposure parameters, ensuring stable image quality while reducing unnecessary radiation and cancer risk.