-)Data Collections -)Real-time Monitoring -)Decision Analysis -)Data Visualization Increase Capacity, Raise Efficiency, Cost Down

TBox101 RadEye PRD-ER4 monitor - Support dummy battery to provide 3V voltage for device power. - Easy to change RadEye device mode at Wearable or Standalone. - Read data from RadEye device through IR interface. - Supports VGA port output for information display - Supports data set and get operations on TBox101 via SNMP. - TBox101 is powered through the USB port.

1.Special design of water metering structure for users of high-rise building and smart houses. 2.Multiple water meters are connected in series to share the construction cost, which is most in line with economic benefits. 3.Graphical presentation of water usage data helps users manage water consumption. 4.Combined with the alarms of abnormal conditions, if there is suspected water leakage or suspected reverse flow, the system will take the initiative to inform. 5.Assist in water and water conservation management, and help users formulate exclusive usage warning ranges.

Through matchmaking of public and private forests, enterprises can acquire forest-related data through hosting mechanisms. This includes metrics such as survival rate, tree height, carbon sequestration, and corresponding SDGs (Sustainable Development Goals) indicators. Leveraging deep learning and image processing technology, CoCoTree transforms trees and forest landscapes into data, providing customers with highly accurate forest information. This includes metrics such as carbon emissions, tree growth status, and changes in the ecosystem.

Multi-payment bus validator takes smart card, mobile payment for bus fare. The transaction data transfer through designated channel to the backend system, smart card issuers, mobile payment operators to perform clearance process. All the validators comply with operation standards and receive certification from smart card issuers, mobile payment operators and TTIA.

MIRDC’s continuously Rotating Wind Turbine UAV Inspection System can effectively inspect the working wind turbine without interference. It takes 5 minutes to complete the inspection of a single blade to effectively detect 4mm small cracks. The system will not lose power generation by turning off the wind turbine, further observes the actual movement status of running blade structure and pillars to grasp the defects beforehand.

Z-COM has invested in heterogeneous network integration R&D for years. Through partnership with global leading Telco operators, we’ve accumulated abundant experience in telecom system integration with Wi-Fi- extended broadband network, to offload traffic from 3G/4G mobile networks as well as providing mobile network coverage with less cost. Over the years, Z-COM’s carrier grade solutions are used to deploy massive scale of Wi-Fi hotspots and various applications for smart city. The new Z-COM carrier-grade wireless network solution introduces Software Defined Network (SDN) architecture, with Edge Computing concepts for Artificial Intelligence of Things (AIoT) applications. The solution offers higher wireless bandwidth, separates control and data plane for edge computing, that provides customized products equipments and software with compatibility, stability, scalability, and security for mobile network operators. Z-COM solutions offer best cost/performance value, with rapid deployment and easy management tools that help telecom operators reduce capital investments and operating expenses, accelerate cost recovery and increase profits.

Taiwan SECOM “Smart City Safety Solution” including: 5G high-speed network transmission, road safety monitoring, real-time analysis of traffic flow and vehicle types, parking violation analysis, license plate recognition, traffic flow analysis, smart parking, air quality detection, personnel positioning and push Notification, e-paper information board and IoT integrated system platform. The platform's principal IOC monitoring and management, Open API interface, and know-how for dispatching services are integrated with multiple subsystems through the back-end management platform. When the system is abnormal, it can be quickly reflected and subsequent disposal. Significantly reduce personnel monitoring and management costs. It will also actively monitor the normal status of the equipment at usual time, when abnormal maintenance, always keep the system equipment running normally, improve the system equipment rate. Meanwhile the new way of operation of the smart city is establishing.

1. Integrating data of water quality and water consumption, the online system will automatically conduct continuous data monitoring, and can be applied for both clean water and sewage water measurement. 2. Real-time monitoring: Seize real-time water information to maintain the stability of water quality and instantly react when abnormal condition is detected, dramatically increasing management efficiency. 3. Smart Dosing Scenario: Integrating automatic dosing equipments with upper and lower alarm settings to ensure dynamic stability of water quality and decrease labor cost. 4. Data Analysis: Apply schedule planning to build up the trend of historical changes and to develop the situation management model. 5. Compliance with the regulations: Complete the full-time management mode, in compliance with the regulations of the competent authority and environmental protection standards. 6. The water quality sensor (specific model) is automatically cleaned without additional consumables and can be cleaned frequently.

Dr. Hung-Lung Lin’s Team – An Auxiliary Assessment System for Coronary Heart Disease Identification In response to population aging and the younger onset of coronary heart disease (CHD), this study develops an AI-based auxiliary CHD screening system integrated into a mobile app. Grounded in traditional Chinese medicine tongue–heart theory, the system analyzes sublingual vascular images using reflection removal, image segmentation, and a multi-head attention deep learning model. Users can obtain accurate, reproducible screening results and health recommendations within 7–20 seconds using only a smartphone, enabling convenient and cost-effective preliminary CHD assessment.

The technical solution of Foxtron Electric Bus combines domestic and international resources, each contributing its strengths： 1. It adopts Foxtron's self-developed VCU software, integrates and develops the EEA architecture for electric buses, and utilizes motors, batteries, and chassis suspension systems from international major manufacturers. In collaboration with domestic manufacturers, Foxtron designs and develops dedicated low-floor bus frames for chassis cooperation. 2. In the product design of electric buses, Foxtron identifies pain points in traditional buses and improves upon them. For example, traditional buses often have issues with rollover protection and numerous blind spots, as well as differential wheel rotation caused by wheelbase, leading to frequent traffic accidents due to visibility problems. To address these issues, Foxtron employs Computer-Aided Engineering (CAE) and NVH (Noise, Vibration, and Harshness) analysis to verify the design of various systems and components. This ensures the overall strength of the vehicle body and chassis, enhances passenger safety, and incorporates features such as panoramic image display and an electronic wide-angle rearview mirror with a blind spot detection system to solve driver blind spot issues. Additionally, to alert pedestrians and other road users to the risk of differential wheel rotation, Model T projects prominent light beams onto the ground during turns, marking the danger zone.

This service can avoid children and elders being lost. Users merely have to bring the device with them, through the sensor installed at the service area, family members can immediately receive users’ instant position through exclusive website, LINE or App. 【Real-time Positioning】 The caregiver can dynamically query and know about the real-time location and the path data for each care receiver. 【Guarding Area】 The caregiver can set different areas as guarding areas, and they will be notified if any care receiver enters or leaves these areas.